Schimpf 00-10/30 STEP, Руководство по эксплуатации, Страница: 32 / 74

Connections
©
by Antriebs- & Regeltechnik Schimpf GmbH 32
Terminal:
13
If a voltage is applied to this terminal, the drive will rotate
counterclockwise (CCW) in the “three-point step” operating mode
.
If the voltage is interrupted at terminal 13 or the end position is reached,
the rotary movement stops.
Terminals:
14,15,16
Relay output R2 “Ready for operation”
This relay switches when the drive is ready for operation and drops out
when the drive is not ready for operation or of there is a error.
Terminal 14: Normally closed (NC) contact
Terminal 15: Reference potential (COM)
Terminal 16: Normally open (NO) contact
AC switching capacity: Max. 250 V, 500 mA, resistive load
DC switching capacity: max. 220 V, 500 mA, resistive load
Terminals:
17,18,19
Relay output R3 “Min position”
This relay switches when the drive has reached the minimum position.
Terminal 17: Normally closed (NC) contact
Terminal 18: Reference potential (COM)
Terminal 19: Normally open (NO) contact
AC switching capacity: Max. 250 V, 500 mA, resistive load
DC switching capacity: Max. 220 V, 500 mA, resistive load
Description of optional connections 00-10
Terminals:
20,21,22
Potential-free output switches 1 & 2
Function normally closed (NC) or normally open (NO) depends on
position of selector switch S16 on the add-on board.
AC switching capacity: Max. 250 V, 500 mA, resistive load
Max. 250 V, 250 mA, inductive load
DC switching capacity: 30 V, 1000 mA, resistive load
Terminal 20:
Normally closed (NC) or normally open (NO)
contact of switch 1
Terminal 21: Reference potential (COM) of switches 1 & 2
Terminal 22:
Normally closed (NC) or normally open (NO)
contact of switch 2