Schiller DEFIGARD Touch 7 Скачать руководство пользователя страница 34

Страница: 34 / 164

Initial Operation

3.4

Printing

Page 34

rt.

no.

: 0-48-

0227

Rev.:

DEFIGARD/PHYSIOGARD Touch 7

3.4 Printing

3.4.1

Pairing Bluetooth devices

3.4.2

Brother Printer Overview

The following data can be printed on the Bluetooth printer:

• Recorded Resting ECG (incl. patient data, patient vitals, interpretation and ECG

curves)

• Screenshots (+/- 5 sec from the moment of the screenshot that contains all

displayed curves, patient data and vital data)

• Intervention report.

1. Select the transmission icon to display the

Data transmission

menu.

2. Select menu

Printer

to display the pairing menu.

3. Switch on the Bluetooth printer and make sure that Bluetooth is activated.
4. Select “Scan for Printer”. As soon as the printer is found, the printer’s identification

number is displayed e.g. RJ-40304072.

5. As soon as the printer pairing is done, printer status in the Data transmission

menu indicates

6. Select “Printer test page” to check the printing function.

In case of communication problem with a Bluetooth device, switch it off and on again.
Scan again for the Bluetooth device.

For detailed information, refer to the Brother P4030 printer user guide.

1. Press and hold the

(Power) button to switch off the printer.

2. Open the cover (1).
3. Insert the RD Roll into the compartment (2).
4. Close the cover.

5. Press and hold the

(Power) button to turn the printer on.

6. Press the

(feed) button to set the paper in the right starting position.

Data Transmission

Transmission list

Communication media

Printer

idle

Data Transmission

Printer test page

Scan for printer

eCPR system

Содержание DEFIGARD Touch 7





































































































































































Результаты поиска

Содержание DEFIGARD Touch 7

Отзывы:

Бренды по названию

Популярные бренды

Schiller DEFIGARD Touch 7, Руководство пользователя

Результаты поиска

Содержание DEFIGARD Touch 7

Отзывы:

Бренды по названию

Популярные бренды