manualshive.com logo in svg

Schiller DEFIGARD Touch 7, Руководство пользователя

Поделиться
Скачать
Schiller DEFIGARD Touch 7 Скачать руководство пользователя страница 20

2

Components and Operation

2.1

Design

Page 20 

A

rt.

 no.

:  0-48-

0227

  Rev.:

 g

DEFIGARD/PHYSIOGARD Touch 7

2 Components and Opera-

tion

The 

DEFIGARD

®

Touch 7

 is a lightweight mains and battery powered defibrillator

featuring an ECG monitor, SpO2/SpCO/SpMet, etCO2,Temperature and NIBP
measurements. It is designed for clinical use. Defibrillation is possible in non-
synchronised or synchronised mode.

Moreover, the device can be switched to automated defibrillation (AED operation) by
pressing a single key

The 

PHYSIOGARD

®

Touch 7

 includes the same features as the 

DEFIGARD

®

Touch

7

, but without the defibrillation function.

2.1 Design

Power supply

The 

DEFIGARD

®

Touch 7

 and 

PHYSIOGARD

®

Touch 7

 is powered by an integrated

rechargeable battery. The capacity of one battery is sufficient for:

DEFIGARD

®

Touch 7

• 100 shocks with maximum energy or 
• >6 hours of monitoring

PHYSIOGARD

®

Touch 7

• >6 hours of monitoring
The battery is recharged by an external DC supply.

Defibrillator

The 

DEFIGARD

®

Touch 7

 

is a defibrillator featuring biphasic pulsed defibrillation

impulse – 

Multipulse Biowave

®

. The defibrillation is done using disposable

adhesive electrodes (pads), which also measure the ECG signal for the analysis.
Adhesive electrodes for children and adults are available. The device recognises the
connected electrodes and selects the defibrillation energy levels accordingly. In the
AED mode, the user will be given visual and audible instructions (display/
loudspeaker). 

Monitoring

According to its configuration, the

 DEFIGARD

®

Touch 7

 and 

PHYSIOGARD

®

Touch

7

 

monitoring function gives all important parameters – ECG, SpO2/SpCO/SpMet, 

etCO2, RR, NIBP, IBP and Temperature. The parameters are indicated in figures and
as waveforms on the large 7” (800x480) LCD display.

Data storage

All intervention data – resting ECG data, lead II ECG, defibrillator ECG, SpO2 curves,
trends, events, patient data.

Data transmission

• Easy transmission of a 12-lead ECG, trends and screenshots by WLAN or GSM

during intervention

• GSM, WLAN, Ethernet (via USB adapter) Communication, for software and

configuration updates and post-intervention data (PDF or Sema format)
transmissions.

Biocompatibility

The parts of the product described in this user guide, including all accessories, that
come in contact with the patient during the intended use, fulfil the biocompatibility
requirements of the applicable standards. If you have questions in this matter, please
contact SCHILLER.

Содержание DEFIGARD Touch 7





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды