manualshive.com logo in svg

Schiller DEFIGARD Touch 7, Руководство пользователя

Поделиться
Скачать
Schiller DEFIGARD Touch 7 Скачать руководство пользователя страница 14

1

Safety notes

1.9

Hygiene

Page 14 

A

rt.

 no.

:  0-48-

0227

  Rev.:

 g

DEFIGARD/PHYSIOGARD Touch 7

1.9 Hygiene

1.10 Networks and Internet

For cleaning and disinfection observe the legal requirements applicable.

Only use cleaning agents and disinfectants recommended by SCHILLER.
Unsuitable agents can damage the device. Clean and disinfect the device in
accordance with the instructions given in this book.

When the unit is part of a network, (LAN, WLAN, HIS, etc.), transmitting over a
telephone network or any other transmission/reception medium, or if exposed to
the Internet or other insecure networks, appropriate security measures must be
taken to protect the stored patient data.

SCHILLER takes no responsibility for the configuration of Windows. 

Patient data security and security of the network is the sole responsibility of the
user.

In order to guarantee the security of the network, Schiller recommends the
following:

– isolating the 

DEFIGARD

®

Touch 7

 or 

PHYSIOGARD

®

Touch 7

 network from

other networks

– defining access authorisation for the configuration of the host system, incl.

DEFIGARD

®

Touch 7

 or 

PHYSIOGARD

®

Touch 7

, so that no unauthorised al-

terations of the system are possible

– limiting the data transmission between the host and other systems/networks to

a minimum

Содержание DEFIGARD Touch 7





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды