Schiller CARDIOVIT CS-104, Руководство пользователя

Страница: 76 / 172

7 Exercise ECG Recording
7.5 During the Test
Page 76
Art
.
no.
:
2.
51
1335
Rev.
a
CARDIOVIT CS-104
7.5.1 Test Control Buttons
The test control button on the bottom of the screen are as follows:
Hold / Pause (treadmill) Hold current stage. The button changes to Resume and the step counter is stopped
(but total work counter continues) until the stage is resumed. During this time the load
on the bike remains / the treadmill speed continues, until resume is again clicked.
Next Go to next stage.
Init Recovery / Recovery (depends on
setting)
Initiates the recovery phase and the button changes to End. The recovery stage is
held for as long as defined in the protocol or until End button is pressed.
Search Returns to the search and discontinues the current ECG acquisition. You are
prompted to confirm:
Acquisition ongoing
An acquisition is currently ongoing. Do you want to discard
the current recording?
Discard Cancel
7.5.2 Information and Settings Panel
Heart Rate Averaged over 4 beats.
• The percentage of current heart to target heart
rate is displayed after the heart rate (the formula
used to define the target heart rate is defined in
system settings (
see para. 11.14, Exercise
ECG, page 133) .
120
48% of 170
82
• If the target is exceeded, the Heart rate indica-
tion changes from green to red and flashes to in-
dicate that the target is exceeded.
Blood Pressure Last entered/recorded blood pressure measurement (systolic/diastolic). The value is
displayed until a new value is entered /measurement taken, or until a new exercise
stage is entered. The previous BP is given beside the current value.
mmHg x bmp The (last) BP measurement taken in the stage, multiplied by the heart rate.
Lactate Select to enter the respective measurement and description.
SpO
2
The SpO
2
measurement received from a connected device /entered manually. ( see
para. 7.5.5, SpO
2
, page 78)
VEBR ( see para. 7.5.6, Arrhythmia (option), page 79) .