Schifler SWC 40, Руководство по эксплуатации

Страница: 14 / 24

Magnetic Drilling Machine
Operating Manual
3 Ensure that the magnetic drilling unit is secure on the working piece.
4 Apply cutting oil to the twist drill and workpiece. Always use cutting oil from
your dealer.
5 Start the motor by pressing the green motor start button.
6 Start bringing the twist drill to the workpiece but handle with care and do not
apply too much pressure. The drill has to find its way in to the material by
itself. It is not necessary to use a lot of pressure. Too much pressure will cause
damage and breakage.
7 After the cutting is finished switch the machine off by pushing the red button.
SWC 40
12