1
2
3
4
7
CARE
boy
OPERATING
INSTRUCTIONS.
Please select the correct pads for cleaning
( BLUE )
or care
( GREEN )
of your oiled / waxed wooden floor and fix them to
your
CARE
boy by using the velcro fastener . Use only original pads - these were specially designed for the optimum use on
parquet floors .
When removing or changing used pads, turn off the power and take them off the velcro . Wash cleaning and polishing
pads immediately after use, so they are ready for the next application right away . You can wash them with up to 60 °C in
your washing machine . For the next use put the new pads with the felt side on the velcro again .
Choose / change the right pads
Remove the rubber plug and fill the water tank with cleaning or care agent by means of the measuring cup . For the care
of your oiled / waxed parquet floor, fill pure Scheucher
PARQUET CARE
into the tank . To clean your parquet floor, pour in
diluted Scheucher
PARQUET CLEANER
accoring to the instructions .
Close the plug and if necessary, clean excess quantities with an absorbent cloth . Make sure that the pump does not run
dry . Therefore, pour some water into the tank after cleaning or waxing, clean the nozzle with with a few sprays of clear
water and then empty the tank again!
Add water / detergent / waxing oil
Handling
CARE
boy
If you slightly press the power switch using your foot, the LED lights will turn on and you can start using your
CARE
boy .
To turn off your
CARE
boy, press the same button till LED lights turns off .
CARE
boy is off now .
STAND-BY MODE
If you leave your
CARE
boy in a standby mode for more than 10 minutes, it automatically switches into a sleep mode .
Press the power switch twice now to reactivate it and continue your activity afterwards .
Power Switch ON / OFF
Press the start / stop button to start waxing / mopping .
Press the spray button to spray water, detergent or waxing oil onto your floor .
REMARKS:
If you press the start / stop or the spraying button, the handle indicator light should light up in red .
If this is not the case, please put some AAA batteries into the battery compartment and restart your
CARE
boy .
START / STOP button, spray button
