19
GB
1. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
89335 Ichenhausen / Germany
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
•
Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating in-
structions, you have to meet the applicable regulations
that apply for the operation of the machine in your coun-
try. Keep the operating instructions package with the ma-
chine at all times and store it in a plastic cover to protect
it from dirt and moisture. Read the instruction manual
each time before operating the machine and carefully
follow its information. The machine can only be operated
by persons who were instructed concerning the opera-
tion of the machine and who are informed about the as-
sociated dangers. The minimum age requirement must
be complied with.
2. Layout (Fig. 1)
1.
Motorunit
2.
Tube extension for hedge trimmer
3.
Drive shaft
4.
Metal ball
5.
Extansion
6.
Adjustment leveer
7.
Switch
8.
Unlocking switch
9.
Screw handle
10.
Hedge trimmer
11.
Front Handle
12.
Flap
13.
Slide switch
14.
Safety switch
15.
Start lever
16.
Rear handle
17.
Screw holder
18.
Belt
3. Scope of delivery
•
Open the packaging and take out the equipment
with care.
•
Remove the packaging material and any packaging
and/or transportation braces (if available).
•
Check to see if all items are present.
•
Inspect the equipment and accessories for transport
damage. In case of complaints the supplier is to
be informed immediately. Complaints received at a
later date will not be acknow ledged.
•
If possible, keep the packaging until the end of the
guarantee period.
• Read the operating instructions to make yourself fa-
miliar with the device prior to using it.
• After that, please dispose of it in an environmentally
friendly way.
• Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
• Specify our part numbers as well as the type and year
of construction of the device in your orders.
m
Important!
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or small
parts. There is a danger of swallowing or suff ocating!
Screw handle x3
Belt
Hedge trimmer
Extansion
Motor unit
www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
Heruntergeladen von
Handbücher-Suchmachiene
