www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
30 |
GB
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified,
•
A breakdown of the electrical system that occurs
due to the non-compliance of the electric regula-
tions and local regulations.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat-
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re-
duce downtimes and how to increase reliability and
service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country. Keep the operating instructions pack-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture. Read
the instruction manual each time before operating the
machine and carefully follow its information. The ma-
chine can only be operated by persons who were in-
structed concerning the operation of the machine and
who are informed about the associated dangers. The
minimum age requirement must be complied with.
In addition to the safety notices contained in this op-
erating manual and the particular instructions for your
country, the generally recognised technical regula-
tions for the operation of identical devices must be
complied with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
2. Device description (Fig. 1 - 14)
1. Transport handle
2.
Pressure switch
3.
Quick-lock coupling (regulated compressed air)
4.
Pressure gauge (for reading the preset vessel
pressure)
5. Pressure regulator
6.
Pressure gauge (for reading the vessel pressure)
7.
Quick-lock coupling (unregulated compressed air)
8. Pressure vessel
9.
Supporting foot (2x)
10.
Drain plug for condensation water
11.
Wheel (2x)
12.
Oil drain plug/ Oil– level window
13. Compressor pump
14.
Air filter
15. Oil sealing plug
16.
ON/OFF switch
17.
Safety valve
18.
Overload switch
19.
Oil filler opening
20.
Screw (Wheel)
21.
Washer (Wheel)
22.
Spring washer (Wheel)
23.
Nut (Wheel)
24.
Screw (Supporting foot)
25.
Washer (Supporting foot)
26.
Nut (Supporting foot)
3. Scope of delivery
m
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
•
2x Air filter
• 2x Supporting foot
• 2x Wheel
•
1x Mounting material
• 1x Oil sealing plug
• 1x Oil bottle
•
1x Translation of Original Operating Manual
•
Open the packaging and remove the device carefully.
•
Remove the packaging material as well as the
packaging and transport bracing (if available).
•
Check that the delivery is complete.
•
Check the device and accessory parts for transport
damage.
•
If possible, store the packaging until the warranty
period has expired.
