2 - GENERAL WARNINGS & INFORMATION TO THE RECIPIENT COD.
80S12/24.D.2018
EN
THE PRESENT MANUAL BELONGS TO -
Schenker Italia
- ALL RIGHTS RESERVED
6
ATTENTION
Any technical changes or operating conditions indicated that affect the correct operation or
safety of the machine must only be carried out by the manufacturer's technical staff or by
technicians formally authorized by the manufacturer. Otherwise, SCHENKER ITALIA declines
any responsibility for changes or damages that may result from it.
2.3 Start-Up
The system SMART 80 test and validation takes place at the end of the assembly at Schenker Italia production
site.
2.4 Warranty
The equipment and the relevant accessories are guaranteed 12 months from delivery. The guaran-tee does
not include consumable items (filters, carbon filters, membranes, etc.). The “ERS” pressure amplification
device is guaranteed 36 months, provided that the annual maintenance is per-formed at a Schenker service
point.
The guarantee covers faults, defect of materials and parts. It is limited to the replacement or re-pair of faulty
parts. The expense for the disconnecting and reinstalling on the vessel and transport of the equipment from or
to our Service Point, or our factory will be at the customers own expense.
The under guarantee delivered parts transport, will be at customer’s own risk.
In case of repairs under guarantee performed by our technicians on the customer vessel, the faulty parts
replacement cost will be at Schenker's expense, while manpower and travel expenses will be charged to the
customer. The guarantee does not include faults caused by negligence in operating, maintenance and
installation of the device (if not carried out by an authorised Schenker Service point).
Dismantling by non-authorized personnel will render void all guarantees. Schenker Italia cannot be held liable
for any direct or indirect damage caused by the malfunctioning equipment, limiting its responsibility to the repair
and replacement of faulty parts.
ATTENTION
SCHENKER ITALIA declines any responsibility for improper use of the machine, for damages
caused as a result of operations not covered by this manual or unreasonable use.