WARNING
Please read ALL the instructions and warnings thoroughly before installing the
replacement parts. Ensure that the fitting instructions are followed exactly,
as failure to do so may result in incorrect installation, and may also result in
the driver, passengers and vehicle being placed in hazardous conditions.
take a really good look
Telescopic Trailer Tow Mirror by
Take a really good look
Replacement Component Installation Instructions
For technical support, contact your Telescopic Trailer Tow Mirror dealer or visit www.ttt-mirror.com
Schefenacker Vision Systems Australia Pty Ltd warrants that this component is free from defects in material
and workmanship under normal use for a period of 12 months from the date of purchase.
Important Information
Schefenacker Warranty – Terms & Conditions
All illustrations are drawn to show driver’s side component.
Existing cover removal.
Make sure you have the required tools:
• flashlight
• slotted screwdriver (with at least a 5” shaft)
• 3/16” (5mm) hex head socket and driver
Approximate installation time: 15 minutes.
Preparation and STEP 1
LIGHT MODULE REPLACEMENT (part # 9000 - 9001)
Vertical slot
Hex-head Screw
Horizontal slot
Figure 1a
Figure 1b
1. Pull the top edge of the main glass as far forward
as practical. It may make a clicking sound as it moves
- this is normal. (See Figure 1a)
Using a flashlight, locate the vertical rectangular slot
on the vehicle side of the main glass opening. It will be
alongside a hex-head screw and another rectangular
slot - horizontal. (See Figure 1b)
Continued over page…
