Schauer JAC2024H Скачать руководство пользователя страница 1

 

Battery Chargers 

 

Models:  

JAC2024H 

(24 volt) 

 

JAC4024 

(24 volt)

   

JAC2036H 

(36 volt)

   

 

JAC1742H 

(42 volt)

   

JAC1548H 

(48 volt)

   

JAC1372 

(72 volt)

   

 

 
 

PLEASE READ

 all operation and safety precautions before using charger. 

Contact Schauer Battery Chargers 

with any questions prior to operation.

 

The term 

battery

 will be used to reference a single battery or multiple battery pack connected in series or 

parallel.  

Caution! 

 Safety precautions must be observed to avoid personal injury, electrical shock or 

battery 

explosion! 

 

Confirm proper application of charger and 

battery

 pack voltage (ie. 24 volt charger with 24 volt 

battery

 pack) 

 

Always check for proper electrolyte level in 

battery

 (do not overfill, acid may overflow during charging) 

 

Charger’s power switch should be Off and unplugged from AC outlet before connecting to 

battery

 

 

Position charger as far from battery as DC cord will allow while charging. Hydrogen gas may escape from battery 
during charging, do not position charger above or below battery while charging 

 

Plug charger into a grounded AC outlet 

 

Operate charger in an environment with proper ventilation 

 

Charger must not be operated in a damp or wet environment 

 

Use proper charge rate (amperage) for 

battery

 rated amp hour (Ah) capacity. Check with 

battery

 manufacturer 

 

Do Not charge a frozen 

battery

 

 

Be sure your 

battery is

 not drawing any load from equipment or instruments when you are charging

 

o

 

 A current draw on the 

battery

 during charging may prohibit charger from switching into the 

maintenance float mode, resulting in overcharging, gassing and low electrolyte levels. Contact 
Schauer Chargers if your application involves a constant current draw for options.

 

 

This is a multi-stage automatic charger: Bulk charge  →  Absorption charge  →  Maintenance 

float 

LED charging sequence indicator Lights:  

Upper LED  (Power): Red – AC power connected, Power switch On 

Lower LED (Equalizer): OFF – Charger Not Connected / Connected and minimum 

battery

 voltage not sensed 

Lower LED (Equalizer): Amber – Charging stages Bulk and Absorption - cooling fan active 

Lower LED (Equalizer): Green – 

Battery

 charged, Charger in maintenance float mode 

 

Flashing Red & Green LEDs: Safety Timer shut off function

 

Отзывы: