Instruction Manual for Electroblock EBL 271
2
Date: 14.02.2011
811.523 BA / EN
1 Safety information
1.1 Meaning of the safety symbols
Y
DANGER!
Failure to comply with this sign may result in danger to life and limb.
Y
WARNING!
Failure to comply with this sign may result in injury.
Y
ATTENTION!
Failure to comply with this sign may result in damage to the device or other
connected consumers.
1.2 General safety instructions
The design of the device is state-of-the-art and complies with approved sa-
fety regulations. Failure to observe the safety instructions may nonetheless
result in damage to the device or injury to persons.
Only use the device when it is in perfect technical condition.
Any faults that may affect the safety of persons or the proper functioning of
the device must be repaired immediately by specialists.
Y
DANGER!
230 V unit carrying mains voltage.
Risk of fatal injury due to electric shock or fire:
F
Do not carry out maintenance or repair work on the device.
F
If cables or the device housing are damaged, no longer use the device
and isolate it from the power supply.
F
Ensure that no liquids enter the device.
Y
WARNING!
Hot components!
Burns:
F
Only change blown fuses when the device is completely de-energised.
F
Blown fuses may only be replaced when the cause of the fault is
known and rectified.
F
Never bypass or repair fuses.
F
Only use original fuses rated as specified on the device.
F
Device parts can become hot during operation. Do not touch them.
F
Never store heat sensitive objects close to the device (e.g. tempera-
ture sensitive clothes if the device has been installed in a wardrobe).
