Installation, Mounting and Maintenance DISA-300
Construction subject to change.
No return possible!
Version:
Maintenance
For reasons of safety, the power supply and hydraulic circuit
must be disconnected prior to any maintenance activity.
If the unit was operated in heating mode, you have to wait until
the register has cooled down.
Disassembling the units
The entire DISA-300 is equipped with a series of safety locks
which allow the grille to be folded down via a rotating mecha-
nism on one of the profiles for safe execution of maintenance.
The unit is dismounted as follows:
DISA-300-1-H
DISA-300-2-H
- Open the safety locks.
- Fold the grille down and remove it.
- This makes the grille and the registers freely accessible
for cleaning purposes.
- After completing the maintenance activity, you must move
the grille again to its original operating position and then
close the safety locks again.
When performing maintenance activities, it is rec-
ommended wearing personal protective equip-
ment, in order to avoid cuts and other injuries
produced by sharp and pointed parts.
