Installation and Setup
Instruction Manual
SK12240U3KOC-LB
shar
ed_Installation-Mechanic_Axx-BGx_ML.indd
6
Instruction Manual SK12240U3KOC-LB © 2020-03 E
2
Installation and Setup
2.1 Mechanical Installation: Dimensions, Mounting Options, and Heat Dissipation
Casing type AT3L
Mounting Options
When mounting the camera, pay attention to the
following:
• Mechanical stability to avoid vibrations.
• Good thermal coupling for cooling the housing.
The power consumption and the maximum
housing temperature of the camera are specified
in section
1.4 - Specifications
.
The best fixing point of the camera is the collar for
the mounting bracket SK5105-L (available as an
accessory).
Four threaded holes M3 x 6.5 mm provide further
options for customized brackets.
The length and weight of the optics might be beyond
the capability of the standard mounting bracket
SK5105-L. For this purpose, a second mounting
bracket type SK5105-2L to hold the tube extension
ring(s) is more appropriate.
Optics Handling
• If the camera and the optics are ordered as a kit,
the components are pre-assembled and shipped
as one unit. Keep the protective cap on the lens
until the mechanical installation is finished.
• If you must expose the sensor or lens surface,
ensure the environment is as dust-free as
possible.
• Gently blow off loose particles using clean
compressed air.
• The sensor and lens surfaces can be cleaned with
a soft tissue moistened with water or a water-
based glass cleaner.
Mounting bracket SK5105-L
Mounting system SK5105-2L
for cameras with a tube
extension > 52 mm
Clamping set SK5101
Set of 4 pcs. clamping claws incl. hex
socket screws (EN ISO 4762–M3x12)
66
10 10
36
M3
Ø3.3
6
50
.3
41
.7
Ø 47
.5
50
20
16.5
3.5
6.5
Ø4.3
15
M4
1/
4’’
20G
40 63
70
6
36
Ø 47.5
70
3.5
31.5
25
10
3.5
70
63
40
1/
4’
’ 20G
M4
Ø4.3