Operating and maintenance instructions
General information
Version 1.0
Page 6 of 56
1.3 Motor type-dependent descriptions
These operating instructions apply to all Schabmüller GmbH standard motors.
Note: Electrical connections, attachments, maintenance measures, etc. may differ
depending on the type of drive or motor. An overview can be found on page 9.
To better understand these operating instructions, please first identify your motor type
using the information on the rating plate (see page 7and page 8).
The motor type is indicated by the following code:
Item
Designation
Comment
1
Motor type
TSA = asynchronous motor
TSL = DC motor
TSS = synchronous motor
TSR = synchronous reluctance
motor
2
Size
Stator diameter/TSL housing
diameter
3
Iron length
Stator length or rotor length (this
size specification can be omitted for
DC motors)
4
Electrical number
Consecutive number of the electrical
calculation
Examples:
TSA 200-100-220
1. Asynchronous motor
2. 200 mm stator diameter
3. 100 mm iron length
4. 220 electrical calculation number
TSL 240-354
1. DC motor
2. 240 mm housing diameter
3.
– not applicable –
4. 354 electrical calculation number
