-
5
-
www.SCEPTRE.com
SCEPTRE X405 HD Display User Manual
•
Always use the accessories recommended by
the manufacturer to insure compatibility.
•
When moving the Display from an area of low
temperature to an area of high temperature,
condensation may form on the housing. Do not
turn on the Display immediately after this to
avoid causing fire, electric shock or component
damage.
•
Do not place the Display on an
unstable cart, stand, or table. If the
Display falls, it can injure a person and
cause serious damage to the
appliance. Use only a cart or stand
recommended by the manufacturer or
sold with the Display.
•
Any heat source should maintain a distance of
at least 5 feet away from the Display, i.e.
radiator, heater, oven, amplifier etc. Do not
install the product too close to anything that
produces smoke or moisture. Operating the
product close to smoke or moisture may cause
fire or electric shock.
•
Slots and openings in the back and bottom of
the cabinet are provided for ventilation. To
ensure reliable operation of the Display and to
protect it from overheating, be sure these
openings are not blocked or covered. Do not
place the Display in a bookcase or cabinet
unless proper ventilation is provided.
•
Never push any object into the ventilation slots
of the Display. Do not place any objects on the
top of the Product. It could short circuit parts
causing a fire or electric shock. Never spill
liquids on the Display.
•
Do not use the Display in a portrait format (by
rotating 90 degrees) under high temperature
environment (25°C or higher), since this would
retard heat dissipation and would eventually
damage the Display.
•
The Display should be operated only from the
type of power source indicated on the label. If
you are not sure of the type of power supplied
to your home, consult your dealer or local
power company.
•
The power cable must be replaced when using
different voltage from that specified in the User
Manual. For more information, contact your
dealer.
•
The Display is equipped with a
threepronged grounded plug, a plug
with a third (grounding) pin. This plug
will fit only into a grounded power
outlet as a safety feature. If your
outlet does not accommodate the
three-wire plug, have an electrician
install the correct outlet, or use an
adapter to ground the appliance
safely. Do not defeat the safety
purpose of the grounded plug.
•
Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.
•
The wall socket should be installed
near the equipment and should be
easily accessible.
•
Only the marked power source can
be used for the product. Any power
source other than the specified one
may cause fire or electric shock.
•
Do not touch the power cord during
thunderstorms. To avoid electric
shock, avoid handling the power cord
during electrical storms.
•
Unplug the unit during a lightning
storm or when it will not be used for a
long period of time. This will protect
the Display from damage due to
power surges.
•
Do not attempt to repair or service the
product yourself. Opening or
removing the back cover may expose
you to high voltages, the risk of
electric shock, and other hazards. If
repair is required, please contact your
dealer and refer all servicing to
qualified service personnel.
•
Keep the product away from
moisture. Do not expose this
appliance to rain or moisture. If water
penetrates into the product, unplug
the power cord and contact your
dealer. Continuous use in this case
may result in fire or electric shock.
•
Do not use the product if any
abnormality occurs. If any smoke or
odor becomes apparent, unplug the
power cord and contact your dealer