manualshive.com logo in svg

Scantronic iNSIGHT 20 Plus, Руководство оператора

Поделиться
Скачать
Scantronic iNSIGHT 20 Plus Скачать руководство пользователя страница 86

Chapter 3: Installation

Uninstalling iNSIGHT Scanner Utilities Software

Operator’s Guide

73

Uninstalling 

i

NSIGHT Scanner Utilities Software

NOTE: 

Perform the following steps only if you want to 

uninstall the software.

If you want to uninstall the drivers and scanner utilities 

software, it is important to do so in the correct order to 

avoid leaving any empty program groups in the programs 

menu. Use the following procedure:

1.

Before uninstalling any programs, close all programs 

and turn off the scanner.

2.

Open the Control Panel and access the list of 

programs.

3.

Uninstall the software in the following order: 

a.

Click&Scan

b.

Scantron 

i

NSIGHT Scanner Utilities

NOTE: 

If you uninstalled the software in an order 

different from that specified above, you will need 

to remove the empty program groups (for 

example, Document Imaging).

Uninstalling ScanTools Plus Software

IMPORTANT: 

This procedure is applicable only if your 

scanner came bundled with ScanTools Plus data 

collection software.

If you want to uninstall the ScanTools Plus software, see 

Chapter 2 of the 

ScanTools Plus Installation Guide

 (included 

with your 

i

NSIGHT 20/20 Plus scanner) for instructions.

Содержание iNSIGHT 20 Plus




























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды