manualshive.com logo in svg

Scantronic iNSIGHT 20 Plus, Руководство оператора

Поделиться
Скачать
Scantronic iNSIGHT 20 Plus Скачать руководство пользователя страница 37

Chapter 2: Scanner Basics

Turning the Scanner On

24

Scantron 

i 

NSIGHT 20 Plus Scanner

Turning the Scanner On

CAUTION: 

Do not turn the scanner on before performing 

the installation procedure covered in Chapter 3, 

“Installation”. Doing so may result in incorrect drivers 

being loaded.

Press and release the switch on the back of the scanner to 

turn the scanner on.

After you turn on the scanner, wait for it to complete the 

self-test. When the scanner is connected to the host PC 

and the self-test completes, the green indicator light will 

remain on and constant and the function window will 

display “1”.

If the scanner is not connected to the host PC and the 

self-test completes, the red indicator will be on and the 

function window will be blank.

Содержание iNSIGHT 20 Plus




























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды