manualshive.com logo in svg

Scantronic iNSIGHT 20 Plus, Руководство оператора

Поделиться
Скачать
Scantronic iNSIGHT 20 Plus Скачать руководство пользователя страница 130

Chapter 5: Maintenance

Cleaning the UDDS Sensor

Operator’s Guide

117

Cleaning the UDDS Sensor

CAUTION: 

Do not use canned air to clean the UDDS sensor 

transmitter and receiver as this could blow debris into 

difficult to clean areas of the scanner.

A dirty transmitter or receiver can result in “false 

paper jam” errors. Use the following procedure to 

clean the transmitter and receiver.

1.

Obtain an “ear syringe” or “nasal aspirator” from a 

local drug store.

2.

Open the scanner cover as described in “Opening and 

Closing the Scanner Cover” on page 107.

3.

Locate the ultrasonic multi-feed detector transmitter 

and receiver. The receiver in the cover is shown below. 

The transmitter is housed in the base of the scanner 

directly opposite the receiver when closed.

4.

Use the ear syringe or nasal aspirator to blow (with air 

only) any debris from the transmitter and receiver 

areas.

5.

Lower the scanner cover and 

press it down firmly

 

until both sides latch.

Receiver

Ear Syringe

Содержание iNSIGHT 20 Plus




























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды