A ring tone signals an
incoming call.
The green LED is ON.
Speaking
Shortly press the speech button to accept the call or longer than 1 second to switch on
simplex communication during the voice communication.
The green LED is ON.
Shortly press again the speech button or the blue door release button to end the call.
Ends the communication after 4 seconds.
Automatic call cut OFF after 2 minutes.
Door release
Preset ex works 4 seconds.
Switch an image
Shortly press the image button to show the image of the front-door station on the display.
also see additional functions
Menu
This button is used to set image and ring tone parameters.
see page 5 and 6
Navigate the menu
These buttons are used to set image and ring tone parameter.
see page 5 and 6
Operation
Switch off the ring tone
Press the call OFF button. When a call comes in, no acoustic signal sounds.
The red LED is ON.
Swicthing lights / internal
calls / additonal functions
Shortly press the function key to switch the lights, to call another indoor station or to
(de-)activate the call diversion resp. door release automatic.
Switching lights is preset ex works, otherwise
a configuration will be necessary, see
configurable functions
BRUsky
version 1.0
Side 2
