Technical information.
READ IMPORTANT SAFETY INFORMATION
LEAFLET BEFORE INSTALLING.
15-01-2021 (Issue 2)
For latest tech info visit: www.scanstrut.com/rokk-wireless
Part List:
Tools Required:
Input voltage range :
10-30V DC (12/24V system)
Input current max:
1.5A
Output power:
5W (5V, 1A)
Standby current draw:
< 0.03W
Waterproof rating:
IPX6 front and back
Certifi cations:
Qi, CE, FCC, ROHS,
UNECE R10 E24
ROKK Wireless - Edge (SC-CW-05E)
ø6mm
6m
DRILLING TEMPLATE
SCALE 1:1
3 x ø2.5mm (3/32”)
to ø3mm (1/8”)
Material
No. 6 Screw
Soft Material
E.g plywood
2.5mm
(3/32”)
Hard Material
E.g Fiberglass
acrylic, hardwood
3mm
(1/8”)
ROKK Wireless Edge
x1
No 6 x 1 1/4” (32mm)
self tapping screw
x3
Pozi screwdriver
ø6mm (0.24’) drill bit
Drill bit (for pilot holes)
Check Scale 50mm
1
2
Select optimum mounting location.
Check viewing angle (a), full jaw extension (b) and 90° adjustability (c).
a.
b.
c.
6
3
4
5
Connect wires to 12/24V supply, ensuring a
waterproof connection. Fuse according
to input voltage and current.
Cut out drill template, check
alignment and stick down.
- Drill Ø6mm (0.24”) hole in the centre.
- Drill 3 pilot holes
(see tools required table
- page 1).
- Lightly de-burr 6mm (0.24”) hole.
- Feed wire through hole.
- Rotate to Landscape
- Apply sealant to 3 x holes.
- Evenly screw the mount into place.
