Scanivalve MPS4264 Скачать руководство пользователя страница 5

Страница: 5 / 99

MPS4264

Section 1: Introduction

MPS4264

Preface

OPERATION OF LAW OR OTHERWISE, INCLUDING THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, AND IN NO EVENT SHALL

SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES.

In the event of a failure:

1) Notify Scanivalve Corporation, Customer Service

De partment. Include model number and serial number.

On receipt of this information, service data or shipping

instructions will be forwarded. This may be transacted by

telephone or e-mail.

2) On receipt of shipping instructions, forward the

pro duct, transportation prepaid. Repairs will be made and

the product returned.

3) All shipments should be made via “Best

Way”. The product should be shipped in the original

packing container or wrapped in protective material and

surrounded by a minimum of four (4) inches of a shock

absorbing material.

Trademarks ® and Copyrights ©

Scanivalve is a registered trademark of Scanivalve Corpora-

tion.

All other brand and product names are trademarks or regis-

tered trademarks of their respective companies.

Packaging for Shipment

If the product must be shipped, whether being returned

to Scanivalve or relocated to another location it must be

packaged properly to minimize the risk of damage. The

recommended method of packing is to place the instru-

ment in a container, surrounded on all sides with at lease

four inches of shock attenuating material such as Styrofoam

peanuts.

Important Notice

Please note that the product specifications and other

information contained in this manual are subject to change

without notice. Scanivalve Corporation makes an effort and

strives to provide complete and current information for the

proper use of the equipment. If there are any questions

regarding this manual or the proper use of the equipment,

contact Scanivalve Corporation.

Contact Information

If there are any questions or concerns regarding any Scani-

valve product please do not hesitate to contact us at the

following:

Scanivalve Corp.

1722 N. Madson Street

Liberty Lake, WA 99019

Telephone: (800)935-5151 (509)891-9970

Fax: (509)891-9481

[email protected]

www.scanivalve.com

Scanivalve Corporation is an ISO 9001:2015 certified

company.

Содержание MPS4264




































































































Результаты поиска

Содержание MPS4264

Отзывы:

Scanivalve MPS4264, Руководство по аппаратному и программному обеспечению, Страница: 5 / 99

Результаты поиска

Содержание MPS4264

Отзывы: