Scanivalve MPS4264, Руководство по аппаратному и программному обеспечению, Страница: 57 / 99

51
MPS4264
Section 5: Software
Validation
DESCRIPTION Starts a validation and places the MPS into VAL mode
SYNTAX VAL [<F or FM>]
Where:
F- Initiates a single temperature field validation, with no oven connection. Connects to the
calibrator.
FM- Initiates a single temperature manual field validation with no oven or calibrator connec-
tion.
When no parameter is present, the unit performs an automated validation based on the cali-
bration group settings
RETURNS Validation Data
EXAMPLE
VAL
>
Multiple Unit Validation
DESCRIPTION When the master receives the MVAL command it starts the multiple device validation sequence
described in the section on multiple device calibration and validation.
SYNTAX MVAL [<F or FM>]
Where:
F- Initiates a single temperature multi-unit field validation, with no oven connection. Connects
to the calibrator
FM- Initiates a single temperature mult-unit manual field validation with no oven or calibrator
connection.
When no parameter is present, the unit performs an automatid multi-unit validation based on
the calibration group settings.
RETURNS Validation Data
EXAMPLE MVAL
>
Zero Offset Calibration
DESCRIPTION Starts a zero calibration and places the MPS4000 into CALZ mode.
SYNTAX CALZ
RETURNS A prompt when ready for the next command.
EXAMPLE CALZ
>