Scanivalve MPS4232, Руководство по аппаратному и программному обеспечению

Страница: 75 / 96

69
MPS4232
Section 5: Software
Multicast Commands
Multiple Unit Find
COMMAND MFIND
TYPE Function
DESCRIPTION Lists all of the MPS4232 devices in the multicast cluster of the master.
SYNTAX MFIND
RETURNS A list of MPS modules found in the multicast “cluster” followed by a prompt ready for the next
command.
EXAMPLE MFIND
Found device SN9 IP Address 191.30.90.9
Found device SN10 Address 191.30.90.10
Multiple Unit Stop
COMMAND MSTOP
TYPE Function
DESCRIPTION Sent to stop multiple units when working with multiple devices. When the master receives the
MSTOP command it issues a STOP command to the multicast address set in the MCAST variable.
Each MPS member of this multicast cluster will stop scanning.
SYNTAX MSTOP
RETURNS Prompt ready for the next command.
EXAMPLE MSTOP
>
Multiple Unit Scan
COMMAND MSCAN
TYPE Function
DESCRIPTION When the master receives the MSCAN command it issues a SCAN command to the multicast
address set in the MCAST variable. Each MPS member of this multicast cluster will start scanning
provided the SSD and SST conditions are met.
SYNTAX MSCAN
RETURNS Scan Data. The prompt will appear after the scan is stopped.
EXAMPLE MSCAN
>
NOTES Output is based on formatting.