Scanivalve MPS4232, Руководство по аппаратному и программному обеспечению

Страница: 47 / 96

41
MPS4232
Section 5: Software
EXAMPLE
LOAD scan.cfg
>
File Contents
COMMAND TYPE
TYPE Get
DESCRIPTION Commands the MPS to list all settings, or a specified group of settings, that are stored on the
flash.
SYNTAX TYPE <filename>
Where <filename> is the name of the file, including the extension. The file must be a configura -
tion file.
RETURNS The file contents and a prompt when ready to accept a new command.
EXAMPLE
TYPE ip.cfg
SET IPADD 192.168.0.240
SET SUBNET 255.0.0.0
SET MAC 0.96.93.95.0.1
SET GW 0.0.0.0
>
List
COMMAND LIST
TYPE Function
DESCRIPTION Commands the MPS to list all settings, or a specified group of settings, that are stored in RAM.
SYNTAX LIST <group>
Where:
<group> Filename Contents
IP ip.cfg IP (bootloader) Variables
ID
id.cfg Identification Variables
S scan.cfg Scan Variables
PTP ptp.cfg PTP Variables
FC Fc.cfg Field Cal Conversion Points
C
Cal_<sn>.cfg Full Calibration Coefficients
M misc.cfg Miscellaneous Variables
FTP ftp.cfg FTP Variables
O oven.cfg Oven Control Variables
PGA
Cal_<sn>.cfg Programmable Gain Settings
T Cal_<sn>.cfg Conversion Settings
RETURNS <setting> <variable>
::: ::: ::: :::
<setting> <variable>
Followed by a prompt when ready to accept a new command.