Scania HIGER, Руководство пользователя

Страница: 1 / 8

SCANIA HIGER USER MANUAL (SJ18LLJ)
Keys- the fob has been removed as people kept shutting door and assuming it
was locked but all the fob did was shut the door not lock it. So, the thinner key
is used to open all doors and most lockers.
Getting in- using the key to unlock the door then pushing the small black
button (lower one) to release the door, pushing the other button will then
close the door but will still need locking with the key.
Doors- If doors will not open check the locker immediately behind the door if
not shut properly it assumes its open therefore will not open, the corner most
likely needs to be pushed in (not by foot!!!)
Power- Power switch is located to the left of the steering wheel lightning
symbol (see chart)
Heat/Air con - Three dials are driver (cab) control, along with number 17/18
(see chart) the rest of the controls are for the passengers.
Driver Adjustments- To adjust fan direction use dial 14 for fan speed use
dial 15 for temperature adjustments use dial 16. For aircon use button 17 and
to recycle the air use 18. See chart for simple passenger controls.
Microphones- Two fitted one is in the dash the other is attached to the wall to
the right of driver seat/window, both are simply slide switch and they are on.
Boiler- Boiler is located in the cupboard by the stairs push in the black button
and the door slides down. Coffee pot to the left (does not heat up well so
never used) to the right is the main machine mechanism. Make sure it’s turned
on at the dash (see chart two buttons for it), once door rolled down you will
see many buttons and four dials and a tap.
Firstly make sure its switched on here too,(see chart for on off button) then
needs filling ensuring the button with the
P (Pump see chart) is on then you
will see a dial with a grey dot on, turning this will fill the boiler, long glass tube
is there so you can see how full it is. Then there is a dial with red dot and black
lines on (far left see chart) turning this will turn on the heat for the boiler,
swing the tap out and then turn the dial with red dot (see chart) to get hot
water to flow (may take 20mins to heat) or turning the dial with the blue dot