1
IP CABLING TRANSMISSION – Active Series
ITEM NO.: IP02EP IP Extender with Power over Coax 500M
IP02EP IP extender is designed to extend any TCP/IP devices for long range transmission up to 500M over
existing coaxial cable. The benefit could send power to camera use over same coax cable. It is perfect to
add one IP camera with power over existing CCTV analog video camera environment. It is a great
surveillance solution for sending IP video links to remote camera installation that are beyond the 100 meters
distance limit of Ethernet and also provide camera power together.
IP02EP IP Extender with Power over Coax 500M
Extend IP camera signal and power together over existing coaxial cable.
Provide power to IP camera DC5V or DC12V.
Long range transmission up to 500 meters (Max.)
Support 10/100BASE-T transmission rate.
Perfect to upgrade the analog camera system into IP CCTV application.
Plug and play for easy installation.
Installation View:
1. Connect IP02PT, IP02PR with coax cable at both ends before powering.
2. Power input use external DC 48V adapter to provide IP camera power DC5V/DC12V.
To make sure the transmission quality, you could setup the DIP Switch based on the cable distance,
a longer distance setup to lower data rate; a short distance could be setup at higher data rate.
Cable:
Link cable use high quality 75Ω coaxial cable.
RJ45 Define:
Ethernet Cable (Use TIA/EIA-568-B)
1. Orange-White
TX+
2. Orange
TX-
3. Green-White
RX+
4. Blue
Reserve
5. Blue-White
Reserve
ETHERNET
DC OUT
DC 5V or DC 12V
