1 input 2 output DVI & Audio CAT5 Extender
ITEM NO.: DE01
Our Smart DE01 DVI CAT5 Extender with audio function is using two CAT5E/6 cables to extend your DVI
display up to 50 meters from your HDTV DVI or HDMI source. DVI transmitter with 2 output, one is
DVI loop output and the other is RJ45 CAT5 cable output for remote display. Under non-HDCP operation
mode, the application could be 1 input to 2 output distribution. Both of output built in signal boost
function, the working resolution up to 1920 x 1200.
DE01 1 input 2 output DVI & Audio CAT5 Extender
Extends any DVI compliant device over two CAT5E/6 cables. One CAT5E cable to send
DVI video signal, the other one send DDC and audio signal.
Extend the transmission distance up to 50 meters at 1920 x 1200.
Extend the transmission distance up to 70 meters at 1024 x 768.
Support analog stereo audio: 20Hz – 20KHz.
Dual output: 1 x DVI loop output for local, plus 1 x CAT5 RJ45 output for remote side.
Built in equalization and signal boost function.
High quality digital video over CAT5e without any signal loss.
Support DDC, EDID and hot plug detection.
Installation View:
EDID Instruction:
1. Make sure to connect all equipments before sending power; then power on, the DE01T will
copy EDID from the local output monitor for source. It will take around 10 seconds to
complete.
2. If local output does not connect any monitor, it will auto copy EDID from remote monitor.
3. If the monitor not connected, it will use the default EDID.
Panel View:
DE01T
