Scandomestic SV 10 Series, Руководство пользователя, Страница: 32 / 69

PROBLEMS WITH
YOUR WINE
COOLER?
You can solve many common Wine Cooler
problems easily, saving you the cost of a
possible service call. Try the suggestions
below to see if you can solve the problem
before calling the servicer.
TROUBLESHOOTING GUIDE
Wine Cooler does not operate.
–
Not plugged in.
–
The appliance is turned off.
–
The circuit breaker tripped or a blown
fuse.
Wine Cooler is not cold enough.
–
Check the temperature control set-
ting.
–
External environment may require a
higher setting.
–
The door is opened too often.
–
The door is not closed completely.
–
The door gasket does not seal
properly.
Turns on and off frequently.
–
The room temperature is hotter than
normal.
–
A large amount of contents has been
added to the wine cooler.
–
The door is opened too often.
–
The door is not closed completely.
–
The temperature control is not set
correctly.
–
The door gasket does not seal
properly.
The light does not work.
–
Not plugged in.
–
The circuit breaker tripped or a blown
fuse.
–
The bulb has burned out.
–
The light button is “OFF”.
Vibrations
.
–
Check to assure that the Wine Cooler
is level.
The Wine Cooler seems to make too much
noise.
–
The rattling noise may come from the
flow of the refrigerant, which is nor-
mal.
–
As each cycle ends, you may hear gur-
gling sounds caused by the flow of re-
frigerant in your Wine Cooler.
–
Contraction and expansion of the in-
side walls may cause pop- ping and
crackling noises.
–
The Wine Cooler is not level.
The door will not close properly.
–
The Wine Cooler is not level.
–
The door was reversed and not
properly installed.
–
The gasket is dirty.
–
The shelves are out of position.