Scandomestic SV 10 Series, Руководство пользователя, Страница: 28 / 69

10. Door limit device
11. Screw
12. Plug
1. When open the door 90 degree, take
out 2 screws (2) from lower door axis
(3), remove the door (4), then pull out
the door and door axis (Fig. A).
2. Put the door (4) safety and take out
the plug (12) from top of door frame,
unscrew 1 screw (11) at bottom and
remove the Door limit device (10),
then install the Door limit device (10)
at top of door frame, please use spare
plug (12) to block the hole at top of
door frame. (Fig. A/B)
3. Take out 3 hinge screws (6) from top
hinge (right) (5) and remove it. (Fig. C)
4. Remove decorative nail (8) from left
top of cabinet and install spare top
hinge (Left) (7) at left top of cabinet
with 3 screws. (Fig. D)
5. According above procedure, install
spare lower hinge (left) (9). (Fig. E)
6. Remove the door hinge from right
side and install on the left side.
7. Block the hole at right top of cabinet
with spare decorative nail (8).
For model SV 100-series, SV 110-
series, SV 120-series and SV 130-
series (with stainless steel door)
1.
Screws
2. Top hinge (right)
3. Lock hole decorative cover
4. Decorative nail
5. Screws
6. Door axis(right)
7. Door bracket
8. Lower hinge (left)
9. Lower hinge (right)
10. Top hinge (left)
1.
Take out 4 screws (1) from top hinge
(right) (2) and remove the top hinge
(right), then put out the door. (Fig.A)
2. Put the door safety and take out the
lock hole decorative cover(3) and dec-
orative nail (4) from top of door frame,
unscrew 2 screws (5) at bottom and
remove the door axis(right) (6), then
install the lock hole decorative cover
(3) and decorative nail (4) at bottom,
please install the spare left door axis
at top of door frame. (Fig.B)
3. Remove the door bracket (7) from
lower hinge (left)(8) and install it at
lower hinge (right )(9). (Fig.C)
4. The door revolves 180 degrees, put
door axis to aim at lower hinge (left)