Scala LINQ, Настройка, Страница: 3 / 3

Scala Inc. Confidential
Confidential © 2020 Scala Inc. All Rights Reserved Page 3 of 3
1.
2.
1.
2.
3.
Connecting the Cables
Wired Connection
If using a network, plug the RJ-45 cable into the RJ-45 jack on the back of the unit. wired
Plug the cable into an RJ-45 jack.
Wireless Connection
Connect the power adapter to the power cord.
Screw the power adapter into the power connector on the back of the unit.
Plug the power cord into a 120V or 240V electrical outlet.
Starting the Device
Once the unit is plugged in, the LINQ player starts. If the unit does not automatically start, press the power button on the front of the
device.
Configuration
To configure the player so that it is ready for playback, refer to . Setting Up Linux Players
Power Over Ethernet
the 11.6" and 15.6" LINQ tablets have a Power Over Ethernet (POE) feature meaning that you do not have to use the power
cord if using a
Internet connection. wired
Important
Before proceeding with player configuration, ensure that you have created a player profile in Content Manager. See Creating a
for more information. Player Profile