SBS SBS-2510, Руководство пользователя, Страница: 16 / 28

14
SBS-2510 Digital Density Meter
Meter
Fill the measuring cell and measure the density
1 Immerse the f illing tube into the sample (1).
2 Press the OK key .

The sample pump starts and stops when the
piston is in the uppermost position.
3 Make sure there are no bubbles in the measuring cell.

The measurement starts.

When the background of the measuring
ribbon changes color, the measurement is
f inished.

The measured v alue is sav ed in the results.
4 Press the OK key .
1
Drain the measuring cell
1 Hold the f illing tube ov er the waste beaker (1).
2 Press the OK key .

The sample pump starts and stops when the
piston is in the lowermost position.
3 Clean the end of the f illing tube with a clean tissue.
6 Transfer results (printing, exporting, pairing with SBS-6500)
6.1 Saving and exporting data
Measured results are stored in the memory of the SBS-2510 Digital Density Meter. These results
will remain stored in memory ev en af ter transf er has been completed and must be manually
deleted on the unit to clear the internal memory .
This section will describe the two def ault methods of sav ing the data to an Excel worksh eet or
direct Bluetooth import into the SBS-6500 Battery Resistance Tester.
Other methods of retrieving, printing and exporting data are possible.
6.1.1 USB stick data transfer option
1 Insert a compatible USB driv e into the USB socket of the SBS-2510 Digital Density Meter.
(USB drive must be formatted in the FAT32 file format)
2 Press the Results button on the main screen of the unit.
3 Press the Report button on the Results screen of the unit.
4 Under report options, Select USB Stick using the Nav igation Joy stick s o print option is
selected to USB Stick and press the OK button.