SBS SBS-2510, Руководство пользователя, Страница: 15 / 28

SBS-2510 Digital Density Meter 13
Parameter Setting Explanation
Fill speed High
The pump f ills the measuring cell with 80 %
of the maximum pump speed.
Measurement
reliability Medium
The result is sav ed as soon as the measured
temperature v alue stay s within 0.72 °F(0.4 °C)
f or 10 s.
Calculation >
Category
Density
A density is calculated.
Calculation >
Calculation
d
The density is not compensated to a
certain temperature.
Calculation >
Result limits
Yes
The SBS-2510 ev aluates if the result is
within a def ined range.
Lower limit
0.9972 g/cm
3
Def ines the lower limit of the range.
Upper limit
0.9977 g/cm
3
Def ines the upper limit of the range.
Clean Drain
Users are prompted to drain the measuring cell.
Printout None
The result is not printed.
5.5.2 Perform the density determination
Start the method

The SBS-2510 is set up to work with the sample pump.

The piston is in the lowermost position.

The home screen is open.
1 Mov e the nav igation joy stick to the lef t.
2 Nav igate to the method y ou want to use and press the Start key .

The home screen opens.
3 Press the Start key .

The Sample ID window opens.
4 Enter the identif ication.
5 Press the OK key .
Rinse the measuring cell
1 Immerse the f illing tube into the sample (1).
2 Press the OK key .

The sample pump starts and stops when the
piston is in the uppermost position.
3 Hold the f illing tube ov er the waste beaker (2).
4 Press the OK key .

The sample pump starts and stops when the
piston is in the lowermost position.
5 Clean the end of the f illing tube with a clean tissue.
6 Repeat the steps once.