SBS SBS-2510, Руководство пользователя, Страница: 13 / 28

SBS-2510 Digital Density Meter 11
Keyboard ov erv iew
8
7
6
1
2
3
4
3 Deletes the character to the lef t of the cursor.
5
–
Display s av ailable characters, numbers and sy mbols.
6
–
Maximum number of characters y ou can enter.
7
–
Minimum number of characters y ou need to enter.
8
–
Display s the entered characters.
5.4 Typical phases of density determinations
Density determinations include the f ollowing two phases.
•
Fill the measuring cell with sample and perf orm the measurement.
•
Prepare the measuring cell f or the next sample.
5.4.1 Fill the measuring cell and measure the density
Because the measuring cell alway s contains residue f rom the prev ious sample or the cleaning
solution, it is important that y ou remov e the residue using the new sample. This is only possible if
the residue is soluble in the new sample.
To achiev e good results, make sure that the measuring cell contains only the sample y ou want to
measure and that there are no bubbles in the measuring cell.
Y ou can use the sample pump or sy ringes to f ill, drain and rinse the measuring cell. The sample
pump is used f or samples with a v iscosity up to 100 mPa*s. Sy ringes are ty pically used if the
v iscosity of the samples is abov e 100 mPa*s.
4
Mov es the cursor.
1
Cy cles between the screens with small, capital or special
characters.
2 Deletes all entered characters.
No. Icon Function
Method ID
Min. 1
Max. 25
5