ELLIPSE2 Micro series
– Hardware Manual
ELLIPSEMHM.1.1
6. Appendix B: Evaluation board documentation
6.1. Board overview
The evaluation board has been designed to test most of the Ellipse Micro functions and also to configure
the device without the need to develop specific cabling.
Following connectors provide easy access to the board functionalities:
6.2. Board configuration Switches
In addition to the connectors, several switches are present on the board to configure the behavior, enable or
disable specific features:
SW4 and SW5 should be combined together to enable following functions:
Ports configuration
SW4
SW5
PORT A RS-422
PORT E disabled
PORT A RS-232
PORT E to ublox GNSS
PORT A RS-232
PORT E to DB-9
25/26
CAN Bus
SYNC A/B
access
GNSS
Antenna
PORT A
(USB)
PORT E
(RS-232)
Ellipse Micro
Connector
Direct access
