EKINOX Series
– Hardware Manual
EKINOXV3HM.1.2
5. Interfaces specifications
5.1. Overview
The Ekinox features the following interfaces:
●
An Ethernet Interface
●
1 to 5 Physical RS-232/RS-422 serial ports (Port A to Port E).
●
Internal data logger
●
CAN bus
●
2x SYNC Outputs and 5x SYNC Inputs
5.2. Ethernet specifications
The Ekinox main port features an Ethernet 100BASE-T interface. This interface is used for the device
installation and configuration through an embedded web page.
This Ethernet interface is a key feature of the Ekinox device as it provides the following services:
●
A Bonjour service used to easily discover any connected Ekinox and get its IP address
●
An embedded web interface used to configure the device and visualize output data
●
An FTP access to download logs recorded in the internal Flash memory
●
Five virtual serial ports Eth0 to Eth4 that support either UDP or TCP/IP protocols
5.2.1. Accessing the Ekinox web page
Thanks to the ZeroConf technology, you can easily access the web page using the Ekinox serial number.
Indeed, the Ekinox broadcast a web service so you can connect to the configuration web page using the
following address:
http://ekinox_02700001.local
Where 02700001 is the device serial number. It can be found on a label located on the enclosure's right side.
If your web browser supports DNS Service Discovery such as Safari, you should directly see a link to all
Ekinox devices available on the network.
Browser Compatibility: SBG Systems recommend using latest version of Chrome, Safari or FireFox
web browser. Due to Internet Explorer limitations, only versions 9 and above are supported.
32/46