Instruction leaflet
Luminatra Spike
54316, 54317, 70057, 70058
www.saxbylighting.com
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Saxby Lighting Ltd. BH23 3PE
Finish - We recommend cleaning with a soft dry cloth.
Do not use abrasive materials as these will damage the
finish.
This system contains non-replaceable parts and cannot
be serviced. If damage occurs the part should be
scrapped.
This LED's are protected by a plastic lens. The lens part must be replaced immediately should it
become cracked or damaged. This fitting must not be used without the plastic lens in place.
Iss.3 06062016
Check that...
•
You have correctly identified the wires.
•
The connections are tight.
•
No loose strands have been left out of the connection
block.
•
Ensure that all cord grips are tightly secured.
•
Ensure that all seals are re-fitted correctly.
Commissioning
•
Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
