Instruction leaflet
PIR Sensor
54413
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Iss.1 23062015
Care and Cleaning
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
PIR Adjustment
The PIR sensor has a fixed detection field of 12m
diameter at a distance of 3m. It can be adjusted for
duration the lamp stays on ("TIME" screw) and the
light level that the switch activates ("LUX" screw).
To adjust when the switch activates, rotate the "LUX"
screw between the sun and moon symbols. sun
indicates the PIR sensor will operate at all times
during daylight and darkness. moon indicates that the
PIR sensor will operate in total darkness only.
To adjust the duration the lamp stays on, rotate the
"TIME" screw b and - . Minimum time on
is 10+/-5 seconds maximum time on is 4+/- 1
minutes
