Instruction leaflet
Severus Outdoor Wall
61220, EL-40108
Commissioning
For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
This light source is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
good quality insulation tape.
Diagram C. Re-fit the led board and the lens housing.
Diagram D. Re-fit the cover plate – click in position.
light is now ready for use.
Fitting/Replacing bulbs
Lens
housing
Diagram C.
Diagram D.
V4 29/11/2020
WWW.saxbylighting.com
Saxby lighting. BH17 7BY
Replace Cracked Shade
