www.saxbylighting.com
Instruction manual
95285, 99545
Severus CCT
V3 20/10/2021
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
UK Manufacturer: BH17 7BY
Technical data
220-240 V~, 50 Hz
Supply
Voltage:
Bulb
Type:
2.8W LED module (SMD) CCT, 3000/4000/6500K
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
Care and Safety
This light source is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked Shade
SUPPLY
NEUTRAL
SWITCHED LIVE
LIGHT FITTING
BLUE (N)
BROWN (L)
Having correctly identified the wiring from your light fitting, connect to the approved outdoor rated external terminal block in
the following way:
Wiring
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of the connection block.
• Reseal the approved outdoor rated external terminal block.
Check that...
Conformity with all relevant EC Directive requirements.
Conformity with all relevant UKCA Directive requirements.
The power supply is Double Insulated and does not require connection to an Earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is rated at IP65.
IP
65
This product is not suitable for dimming.
For further information, please visit
https://www.lighting-info.co.uk/95285
This product contains a light source of energy efficiency class
E
.
Non-replaceable control gear
Non-replaceable light source
