• This system contains non-replaceable parts and
cannot be serviced. If damage occurs the part should
be scrapped.
Instruction leaflet
Magma Flood Light
43784
www.saxbylighting.com
For your safety, always switch off the supply before cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Saxby Lighting Ltd. BH23 3PE
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
The LED's are protected by a lens. This part must be replaced immediately should the lens become
cracked or damaged. This fitting must not be used without the lens in place.
Replace Cracked
Shade
Fitting/replacing bulbs
Iss.1 09052012
• Refit the base onto the product using screws (A).
• Locate the product over the drilled holes and fix in
position using screws (C).
• Adjust the floodlight head to the desired angle.
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
Commissioning
Check that...
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of the connection
block.
