• Connect the LED driver output cable to the LED panel,
ensuring it is securely clipped together.
• Refit the LED panel and diffuser unit by clipping it into
place ensuring the sides are aligned with the body. Take
care not to trap any cables.
• Refit the end caps ensuring they are clipped into
position.
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use..
• The LEDs in this fitting are non-replaceable.
• If any damage occurs this fitting should be discarded.
Commissioning
Fitting/replacing bulbs
Instruction leaflet
Linear Pro
72364, 72365, 72366, 72367, 72368, 72369
www.saxbylighting.com
Live Voltages may be present in this unit even when turned off or when completely disconnected.
For your safety,
always switch off the supply before cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Saxby Lighting. BH23 3PE
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Iss.2 05062018
