www.saxbylighting.com
Instruction manual
78542
Axial Rectangular
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
Care and Safety
Technical data
220-240 V~, 50 Hz
Supply
Voltage:
Bulb
Type:
35W LED module (COB), 4000K
Conformity with all relevant EC Directive requirements.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
Wiring
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of the
connection block.
Check that...
This LED's are protected by a shade. The shade part must be replaced immediately should
it become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked Shade
Conformity with all relevant UKCA Directive requirements.
This product contains a light source of energy efficiency class
F
.
Non-replaceable light source
Replaceable control gear by a
professional
For further information, please visit
https://www.lighting-info.co.uk/78542
V2 10/06/2022
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
UK Manufacturer: BH17 7BY
NEUTRAL
SWITCHED LIVE
BLUE (N)
BROWN (L)
SUPPLY
LIGHT FITTING
Having correctly identified the wiring from your existing light fitting, pull the mains wire through the hole and connect
to the connection block inside the LED driver in the following way:
This unit is double insulated and must not be earthed. If there are any incoming earth cables, they must be joined together
and well insulated with good quality insulation tape. This is to ensure earth continuity throughout your property.
The power supply is Double Insulated and does not require connection to an Earth circuit.
