background image

www.saxbylighting.com

Instruction manual

13801, 13802, 75432, 75434, 75436, 75437, 75439, 
75441, 75443, 75444, 75448, 75449, 94792  

Palin LED Wall & Spot  

Saxby Lighting. BH17 7BY

V2 23/10/2020

For your safety, always switch off the power supply before changing lightbulbs, adjusting spotlight heads or cleaning.

Care and Safety

Technical data

240 V~, 50 Hz

Supply

Voltage: 

Bulb

Type: 

13801/75434/75436/75441/75443/75448 :             1 x Max. 7W LED GU10
13802/75432/75437/75439/75444/75449/94792 :  2 x Max. 7W LED GU10

Conformity with all relevant EC Directive requirements.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities

exist. Check with your Local Authority or local store for recycling advice. 

This product is rated at IP44.

IP

44

This product is suitable for dimming.

13801, 75434,

75441

75436, 75443,

75448

75437, 75444,

75449

This is a Class 1 product and must be earthed.

Do not use solvents or abrasive cleaners as these could damage the finish.

13802, 75432,

75439, 94792

For  

13801, 13802, 75448

 and 

75449

, in normal circumstances, stainless steel is very resistant to corrosion.

It does however require maintenance to preserve the high quality appearance. Wash the product with warm soapy water,
removing all surface deposits. Rinse with clear water and with a soft cloth, wipe dry. 

In some cases, surface corrosion may arise after installation. This is normally caused by tiny iron particles left behind after
the brushing process when finishing. 

Wash and dry as detailed above. Then with a soft cloth soaked with a protective oil, wipe all over. 

Do not clean the units with a pressure washer. 

However if the product is subject to extreme environmental conditions such as marine locations, industrial pollution and acid
rain these maintenance procedures should be carried out around four times a year. For severe corrosion, non-abrasive cream
cleaners or proprietary stainless steel cleaners should be used to remove the corrosion. Wash and dry as detailed above.
Then with a soft cloth soaked with a protective oil, wipe all over.

Отзывы: