ON
ECE
1234
12V
+
6
6. INSTALLATION OF
SAFETY SUPPORT
An additional safety support is provided to
prevent the fan from falling. Secure the
safety cable to the ceiling joist with screw
and washer, as illustrated in Figure 11.
7. MAKE THE ELECTRIC
CONNECTIONS
WARNING:
To avoid possible electrical
shock, be sure electricity is turned off at
the main fuse box before wiring.
NOTE:
This remote control unit is
equipped with 16 code combinations to
prevent possible interference from or to
other remote units. The frequency
switches on your receiver and transmitter
have been preset at the factory. Please
recheck to make sure the switches on
transmitter and receiver are set to the
same position, any combination of
settings will operate the fan as long as the
transmitter and receiver are set to the
same position. (Figure 12)
Step 1.
(Figure 13) Insert the receiver into
the mounting bracket with the flat side of
the receiver facing the ceiling.
Step 2.
(Figure 14) Motor to Receiver
Electrical Connections: Connect the black
wire from the fan to black wire marked
"TO MOTOR L". Connect the white wire
from the fan to the white wire marked "TO
MOTOR N" from the receiver. Connect the
blue wire from the fan to the blue wire
marked "For Light" from the receiver.
Secure the wire connections with the
plastic wire nuts provided.
Hanger bracket
Safety cable
Figure 11
Figure 12
Figure 13
Receiver
Hanger
bracket
Code switch
ON
ON
