manualshive.com logo in svg

Savin Aficio SP 4100N, Руководство по эксплуатации

Поделиться
Скачать
Savin Aficio SP 4100N Скачать руководство пользователя страница 64

Making Option Settings for the Printer

Make option settings for the printer using the printer driver when bidirectional communication is disabled.

Conditions for Bidirectional Communication

Bidirectional communication allows information about paper size and feed direction settings to be
automatically sent to the printer. You can check printer status from your computer.

• Bidirectional communication is supported by Windows 95/98/Me/2000/XP, Windows Server

2003/2003 R2, and Windows NT 4.0.

• If you use the RPCS printer driver and bidirectional communication is enabled under Windows 2000,

the [Change Accessories] tab is unavailable.

• The RPCS printer driver supports bidirectional communications and updates the printer status

automatically.

• The PCL printer driver supports bidirectional communications. You can update printer status manually.
• The PostScript 3 printer driver does not support bidirectional communications.

To support bidirectional communication, the following conditions must be met:

When connected with parallel cables

• The computer must support bidirectional communication.
• The printer must support bidirectional communication.
• The interface cable must support bidirectional communication.
• The printer must be connected to the computer using the standard parallel cables and parallel

connectors.

• Under Windows 2000, [Enable bidirectional support] must be selected, and [Enable printer

pooling] must not be selected on the [Port] tab with the RPCS printer driver.

When connected with the network

• DeskTopBinder Lite must be installed, or the Standard TCP/IP port must be used.
• Under Windows 2000/XP, Windows Server 2003/2003 R2, [Enable bidirectional support]

must be selected, and [Enable printer pooling] must not be selected on the [Ports] tab with the
RPCS printer driver.

If the Standard TCP/IP port is not being used, one of the following conditions must be met in addition
to the two above:

• The SmartDeviceMonitor for Client port and the TCP/IP protocol must be used.
• The standard TCP/IP port must be used without changing the default port name (for Windows

2000 / XP and Windows Server 2003/2003 R2).

1. Preparing for Printing

62

1

Содержание Aficio SP 4100N

























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды