Savin 8025e Скачать руководство пользователя страница 135

Страница: 135 / 160

Programs

127

Programs

You can register frequently used settings in the machine memory and recall
them for future use.

Note

❒

You can register up to 10 programs for the scanner mode.

❒

Programs are not deleted by turning the power off or by pressing the

{

Clear Modes

}

key unless the content is deleted or newly registered.

❒

The following settings can be registered to programs: the scan settings, 1 sid-
ed/2 sided original, Top to Top/Top to Bottom, Last Page, Divide, Original
Feed Type, File Type, Batch/SADF, and Stamp.

Registering Frequently Used Setting

To register frequently used settings in a program:

On the initial scanner screen, make the settings you want to register in a
program.

Press the

{

Program

}

key.

Press

[

Register

]

Select the number of the program in which you want to register the set-
tings.

Program numbers with

already have settings in them.

The soft keyboard appears.

Enter the program name.

You can enter up to 40 characters.

ARQ002S

Содержание 8025e

































































































































































Результаты поиска

Содержание 8025e

Отзывы:

Savin 8025e, Руководство по эксплуатации, Страница: 135 / 160

Результаты поиска

Содержание 8025e

Отзывы: