manualshive.com logo in svg

Savin 8025e, Руководство по эксплуатации, Страница: 11 / 160

Поделиться
Скачать
Savin 8025e Скачать руководство пользователя страница 11

3

About the Scanner Functions

This section describes functions you can use in the scanner mode.
For details about each function, see respective chapters.

❖

Sending scanned files

There are several methods you can use to send captured data as files to com-
puters.
• Sending scan files by e-mail

For details, see chapter 1 "Sending Scan Files by E-mail".

• Sending scan files to a shared folder

For details, see chapter 2 "Sending Scan Files by Scan to Folder".

• Sending scan files to an FTP server

For details, see chapter 2 "Sending Scan Files by Scan to Folder".

• Sending scan files to a NetWare server

For details, see chapter 2 "Sending Scan Files by Scan to Folder".

• Delivering scan files using the delivery server

For details, see chapter 4 "Delivering Scan Files".

❖

Scanning originals using the TWAIN driver

Use the TWAIN driver to specify the machine where originals will be scanned
from a client computer. For details, see chapter 5 "Scanning Originals with the
Network TWAIN Scanner".

❖

Storing files

You can store scan files on the machine's hard disk. Stored files can be sent
later. For details, see chapter 3 "Storing Files Using the Scanner Function".

Reference

p.11 “Sending Scan Files by E-mail”
p.35 “Sending Scan Files by Scan to Folder”
p.79 “Delivering Scan Files”
p.95 “Scanning Originals with the Network TWAIN Scanner”
p.59 “Storing Files Using the Scanner Function”

Содержание 8025e

































































































































































Отзывы:

Нет отзывов