100
Output frequency
Hz
Time
Set frequency
f
T
Rated frequency
f
b
Figure 5-14 S curve acceleration and deceleration B
07-14
Rotation speed tracking mode
Factory setting
0
Setting range
0
Start from stop frequency
1
Start from zero speed
2
Start from maximum frequency
In order to complete the speed tracking process in the shortest time, choose the method of inverter tracking:
0: Track down from the frequency of power failure, this method is usually selected.
1: Start tracking from 0 frequency and use when the power is off for a long time before restarting.
2: Track down from the maximum frequency, generally used for generating loads.
07-15
Rotation speed tracking speed
Factory setting
20
Setting range 1
～
100
When the speed tracking is restarted, select the speed of the speed tracking.
The larger the parameter, the faster the tracking speed.However, if the setting is too large, the tracking effect may
be unreliable.
08 Man-machine Interface Parameters
08-00
User password
Factory setting
0
Setting range 0
～
65535
08-00 sets any non-zero number, the password protection function takes effect. The next time you enter the menu,
you must enter the password correctly, otherwise you cannot view and modify the function parameters, please
remember the set user password.
Set 08-00 to 00000, then clear the set user password and invalidate the password protection function.
Содержание S3100A Series
